Help for the Hoffmann Rubber-Compass
1. Make your choice
Please choose one or more rubber properties by clicking onto the property
buttons, Clicking again makes your choice obsolete. If you choose the physical
properties “Cold flexibility up to xx C” or “max. temperature up to xx C” you
will have to choose the requested temperature range.
2. Indication of the rubber type
The rubber-compass will show you, after having chosen a property, simultaneously
the corresponding elastomer as well as possible alternatives in a window on the
left hand side off the rubber-compass. The proposals are linked to the
rubber-dictionary which allows you to receive more informations to the
elastomeres at any time as e.g. available hardnesses in Shore A. With the
return-button you will get back to the rubber-compass.
3. Reporting of your entries
With the function print you can printout your entries and the corresponding
results at any time.
4. Reset-button
If you would like to reset all your chosen criterias just click on the
Reset-button in the middle of the rubber-compass. All marked properties will be
deleted again.
5. IT preconditions
The Hoffmann Rubber Compass can only be shown correctly if your actual browser
has a Flash-Plugin Version 9 or higher. If you have technical problems please contact us and let us know your system
software, your browser type and version as well as the version of your Flash
PlugIns installed.
6. No guarantee
The Rubber Compass must be seen as first information which basic elastomer will
be suitable for your specification. It does not replace the testing of the
chosen rubber compound for your application. We will not take over any liability
for the determined results of the Rubber Compass.
© 2007
Hoffmann GmbH
Tannenbergstr. 131
73230 Kirchheim / Teck
Fon 07021 95010 - 0
Fax 07021 95010 - 55
mail@hofftech.com
www.hofftech.com